High tech and specialty gases
ACM 150G2
The ACM 150G2 is a centralised gas monitoring system using FT-IR (Fourier Transform Infrared) spectroscopy. It monitors up to 40 points sequentially and can detect up to 15 gases per location.
What it is
Purpose and use
FT-IR is the answer to a different problem from Chemcassette® tape. Tape-based detection is unmatched for hydrides and mineral acids at parts-per-billion level, but it is specific to a gas group. An infrared spectrometer reads a spectrum, so the same analyser can identify many different substances at the same measuring point — up to 15 gases per location in this case.
Honeywell states a rugged, sealed aluminium body for demanding industrial environments, improved signal-to-noise ratios, low detection limits and robust self-diagnostics, with a touchscreen interface and flexible communication options.
Technical description
- Centralised FT-IR (Fourier Transform Infrared) gas monitoring
- Sequential monitoring of up to 40 points
- Detection of up to 15 gases per location
- Rugged, sealed aluminium body
- Improved signal-to-noise ratio, low detection limits and self-diagnostics
- Touchscreen interface with flexible communication options
Stated according to the current manufacturer documentation. Binding data for a specific configuration is confirmed with the quotation.
Application
Where it is used
- Production areas with many different gases at the same points
- Semiconductor and specialty gas facilities alongside tape-based systems
- Installations where substance identification matters, not only threshold alarms
- Demanding industrial environments where an analyser enclosure has to survive
Accessories and spare parts
- Sampling tubing, filters and fittings
- Calibration gases and verification equipment
- Spare pump and optical components
Service by VERTEX GmbH
What we deliver around this product
We work out whether infrared or tape-based detection — or both — fits your gas list, design the sampling layout, install and commission the system, and run the calibration and verification schedule.
Honeywell and the product names on this page are trademarks of Honeywell International Inc. VERTEX GmbH is an independent supplier and service provider in Krefeld, Germany.
FAQ
Questions about ACM 150G2
FT-IR or Chemcassette® — which do we need?
Chemcassette® where the substances are hydrides, mineral acids or similar and have to be seen at parts-per-billion level with physical evidence of the event. FT-IR where many different gases occur at the same measuring points and identification matters. Large facilities often run both, each on the points it suits.
What does sequential monitoring of 40 points mean for response time?
The analyser works through the points in a cycle, so the time between two measurements at the same point depends on the number of points and the dwell time per point. Response time is therefore a design parameter, not a fixed specification — it is set when the sampling concept is drawn up.
Enquiry
Send us your specification
Send us your requests with technical specifications to receive a prompt reply from our industry specialists. For gas detection, add the gases and the zone classification.
Or by email: purchasing@vertex-group.de